FF197 Fire Rated PU Construction Foam

Fire Rated PU Construction Foam

Product Finder

Talk to our team

FF197 is a modified, single component, fire rated polyurethane foam used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building.

Fire Rating: 240 Minutes

Usage/purpose

FF197 is used to seal door frames and linear gaps throughout the fire rated areas of a building.

Always read SDS, pre-application guidance and relevant application detail prior to application. Ensure the latest documents are downloaded prior to every project commencement.

Use in well ventilated conditions.
As with all PU foams, FF197 will not adhere to Teflon, polyethylene or silicone coated surfaces.
The cured foam is adversely affected by UV light and should be covered with a suitable sealant such as FS703 or FS702.
For nozzle application, invert can and direct nozzle into gap and press gently on the adaptor to establish the correct flow rate.
Ensure the surface to be cleaned is solvent resistant prior to using or applying AA290 as a cleaning agent.
AA290 TDS & SDS are available at www.illbruck.com/AA290.

Safety data sheet must be read and understood before use.
Extremely flammable aerosol. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.

  • Tested to BS EN 1634-1 (fire door): FD60 performance achieved.
  • Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated).
  • Tested without architrave (fire door).
  • Tested with plastic packers (fire door).
  • Gaps up to 35 mm (fire door).
  • Excellent acoustic performance - up to 62 dB.
  • Tack free in 10 minutes.
  • 2-in-1 gun & nozzle canister.
FF197 Application Guidance (en-GB).pdf Application Instructions
FF197 Declaration of Performance (en-GB).pdf Declaration of Performance
FF197 Safety Data Sheet (en-GB).pdf Safety Data Sheets
FF197 Technical Data Sheet (en-GB).pdf TDS